Strike Industries Anti-walk/Anti-rotation Trigger/Hammer Pins

Strike Industries Anti-walk/Anti-rotation Trigger/Hammer Pins

Product Code:
Calculated at Checkout
$14.95 $13.95



  • Keep your hammer and trigger pins from coming out
  • Polished surface improves trigger feel
  • QPQ Nitride for smooth function and long life
  • Compatible with AR-15 and AR-10 lowers
  • Tool-less installation


  • Material: S45C Steel
  • Finish: QPQ Nitride
  • Weight: 0.2 oz.
  • Pin Diameter: 0.154"


  • 2x Anti-walk Trigger/Hammer Pins
  • 1x Strike Industries AWP Clip


There are some simple upgrades that can give an operator greater peace of mind than he might have with standard Mil-spec parts. One of those small upgrades that a lot of guys make is a simple change to Anti-walk trigger pins in their rifles. A set of anti-walk pins is a necessity with many trigger packs and will lessen wear in most applications, but many of them are a compromise. With traditional anti-walk trigger pins, you lose the ability to take your pins out without tools for a quick breakdown if you have a problem. Strike Industries addressed that problem head on with the design of their secure set of anti-walk pins, so you can remove them without extra tools and install them without liquid thread lock.

Innovative Tool-less Design

Strike Industries’ Anti-walk/Anti-rotation Pins feature an innovative retention clip that relieves the need for special tools or thread lock when installing a secure pin set. There are no extra small parts to lose, so working in less than perfect conditions isn’t a big problem. The clip fits onto the anti-rotation hammer and trigger pin using slots machined into the pins. Those slots make all the difference, creating an anti-rotation pin set that you can really count on. While other pins might feature a screw or clip on each pin, this single clip system assures that those pins aren’t going to spin, they simply can’t rotate once the clip is in place, holding both pins secure without extra goo or additional screws.

Quality Materials, Superior Products

Strike Industries uses quality steel to make their anti-rotation pins. They machine it to a flawless finish and give each pin a quality QPQ nitride finish that will provide a long, worry-free service life. The exceptional smoothness of these pins allows your fire control group to operate at its absolute best. Strike Industries’ quality, it’s a difference you can feel.

Write a Review

26 Reviews

  • Anti Walk trigger pins

    Posted by Jason on 7th Sep 2020

    It’ll work. Pins must be rotated to line up latch.

  • Anti Walk trigger pins

    Posted by Jason on 7th Sep 2020

    It’ll work. Pins must be rotated to line up latch.

  • Great Pins!

    Posted by BDB on 23rd Aug 2020

    No screws to back out, no need for locktite, super simple, tight secure and great price!

  • Anti Walk Pins

    Posted by Ulisses on 4th Jun 2020

    Best bang for your buck ! No little screws to mess with just install and clip it in.looks good,holds secure.

  • Strike Industries Anti-wall pins

    Posted by Dalton on 3rd May 2020

    These pins have worked out tremendously! I put them on my 7.5” 5.56 and they run like a champ! These shipped fast even with the Covid-19 stuff going on. Very pleased with this product and will be ordering from wing tactical again!

  • Perfect

    Posted by Alex on 14th Apr 2020

    Perfect fit in my Aero Lower. I used a gunsmith plastic hammer to tap it into locking position. Make sure to line it up before tapping

  • Anti-walk pin

    Posted by Steven Lunsford on 12th Apr 2020

    Great shipping

  • replace standard pin

    Posted by Albert Dodd on 9th Apr 2020

    these really are great now have in both my lowers

  • Anti-walk/spin

    Posted by C Acosta on 30th Mar 2020

    Fits my aero precision lower just fine. Just line it up and it slips right in. It DOES NOT fit on my S&W MP 15-22. The polymer lower is wider than the standard Milspec lower. It does not come out of the other end.

[ ]