- Easy magazine release for left handed shooters, or when shooting from the off-hand
- Simple installation, installs just like the factory magazine release
- Utilizes original magazine release button, or can be used with enlarged or extended buttons
- Does not interfere with some ambidextrous bolt releases, such as the Troy and Magpul B.A.D lever
- Material: Tool Steel
- Finish: Black Nitride
- Weight: 0.42 oz.
- Mil-Spec AR-15 lower receivers
The Troy Industries Ambi Magazine Release makes the AR-15 platform more ergonomic than ever for left-handed shooters while preserving right-handed functionality. When installed onto the lower receiver, it will provide you with a mag release button identical in size and location to the standard right-handed mag release.
Installation can be performed in seconds with no special tools or gunsmithing required. The entire piece is constructed from billet tool steel to provide the unwavering performance that Troy Industries is famous for.
If you're a lefty shooter tired of struggling with the right-handed magazine release, this simple accessory can make operating your AR-15 easier than ever! It is also great for right-handed police or military operators who may find it necessary to fire with the off-hand.
Attention Lefties ! Best ambi mag release.
Posted by GWC on 13th Dec 2017
Troy Ind ambi mag release works as well as many ambi mag release products but its position (forward) allows for almost any enhanced bolt catch. Does not sit directly under bolt catch. I have tried them all and run Troy on all my builds.
Great Product, Installs Easily and works Flawlessly !
Posted by Scrambler82 on 4th Oct 2016
New to AR’s, purchased a great AR from a local shop but they had no Ambidextrous Products.
Got on the web found Wing Tactical and the "Troy Industries Ambidextrous Magazine Release”.
Packaging was good enough to get the part to me without damage.
The quality of the part stood out immediately to me (30 years of Quality Assurance Engineering) well machined, no sharp edges, fitment was great and an easy install. I know… what more do you want !
It work better than I thought it would, quick release, no jamming, a good quality product at a reasonable price.
I just got another lower and I will be ordering my Ambi Mag release soon.
Best part of this product is from the right side of the Firearm it looks stock, Bullet Release an all.
If you are a lefty or even a righty with a long thumb, try this product, you will wonder where it has been all this time.
It works !
Posted by Scrambler82 on 18th Sep 2016
I purchased the "Troy Industries Ambidextrous Magazine Release” for my newly purchased AR-15, thinking I would need a Gun Smith to install but that was not the case.
After watching a quick video on U-Tube I removed the OEM Release using a screw driver and then unscrewed the mechanism. the New unit went back together in reverse order and without a problem.
I like the way it works, easy install, straight forward, releases all of my mags, including the MagPul 10 rd Mags, which are the ones I use the most.
Shipping was fast, straight to the Mail Box.
Packaging was good enough to get the item to me in good condition.
Thanks Troy for a great product and to Wing Tectical for carrying great products.
Troy Ambi is very good
Posted by Unknown on 28th Jul 2016
This was easy to install on my Ruger AR-556. It's a keeper!
Absolute must for a left handed shooter
Posted by Mike on 7th Sep 2015
Installation is stupid easy. I installed this on a POF Puritan. Just depress the magazine release button on the right side of the receiver and spin the original left side release catch, then spin on the Troy catch. The left side lever button sits right below the bolt carrier release easily operated without moving or removing your hand from the grip.
Needed Mods for 15-22
Posted by Scott Wylie on 21st Aug 2015
I purchased this product for my wife's S&W M&P 15-22 AR. While it is not 100% technically an AR due to the caliber, in most respects it is identical. The Ambi Mag Release took quite of bit of machining and time on a diamond pad before it would properly seat in the lower, AND catch on factory mags. I did get it to work, but would not recommend this product for the 15-22.
definitely does what it says and is made of high quality
Posted by Unknown on 15th Jun 2015
Only thing is that the mag catch was a little to thin on the side that actually catches the mag but this was due to me having a new frontier billet lower I just added sine jb weld to that and works perfect now
A must for southpaws.
Posted by Mike on 23rd Mar 2015
Perfect in fit, form and function, easy installation.
troy industries ambidextrous mag release
Posted by Unknown on 26th Feb 2015
Work's better than I thought it would. Fit on my Bushmaster carbon 15 in about 5 minutes good price and shipped fairly quick