Odin Works ATLAS 6.5 Compensator (6.5 Cal)

Odin Works ATLAS 6.5 Compensator (6.5 Cal)

Product Code:
ODW-MB-ATLAS-6.5
Shipping:
Calculated at Checkout
$99.00 $94.05

MPN: MB-ATLAS-6.5

Features:

  • Adjustable titanium sleeve to allow customization of the gas port angles
  • Three-piece design: End cap, body, sleeve
  • First ever modular adjustable recoil reducing compensator
  • Eliminates the need for crush washers, peel washers or shims
  • Perfect for 6.5mm builds

Specifications:

  • Caliber: 6.5mm / 6 mm
  • Material:
    • Body / End cap: 416R Stainless Steel
    • Sleeve: Titanium
  • Weight: 4.41 oz.
  • Length: 3.03"
  • Diameter: 1"
  • Thread: 5/8"-24 TPI

Details:

There are a lot of muzzle devices on the market and a lot of them really help control the motion of a fired rifle. That is if they’re applied correctly. Most muzzle devices have to be timed correctly in order to work as they’re intended to. That means the process of mounting those devices is often a painstaking process requiring shims, crush washers or another specialty mounting accessory. In the end, if it doesn’t come out quite right you’re going to have to remove it and start all over again. ODIN Works puts an end to all that nonsense with their modular 6.5 compensator, the ODIN Works ATLAS 6.5.

What Makes the ODIN Works ATLAS 6.5 Compensator different?

Most 6.5 Compensators are one-piece units that must be carefully timed to properly position their ports and baffles to properly manage the expulsion of gasses created when firing. If those positions are just a little off, the effects are less than stellar. You may as well take off the muzzle device and start the application process all over again. That isn’t a problem with the ODIN Works ATLAS 6.5.

A Design Apart

The ATLAS family of compensators utilizes a three-piece design that makes timing at application a thing of the past. The ATLAS features an outer titanium sleeve, with dynamic cut-out ports. Underneath that sleeve, the ATLAS Compensator’s main body features three rows of ports in alternating positions all the way around. A screw-on end cap stabilizes the ATLAS sleeve and features three set screws to hold the sleeve in place when you have it timed to produce an optimum performance with your rifle and your shooting style.

Ultimate On-the-go Adjustability

The three-piece design of the ODIN Works ATLAS allows you to accommodate for directional muzzle movement by simply changing the angle of the ports in the titanium sleeve on the outside of the comp. If something changes, it’s easy to adjust by backing off the setscrews and repositioning the sleeve. The ATLAS' modular design gives you the ability to adjust the timing of the device at the range without a vise or any special tools on hand. Let there be no doubt about it, the ODIN Works ATLAS 6.5 Compensator is a game changer.

Write a Review

Frequently Bought Together

Please choose options for all selected products

[ ]