Features:

Aimpoint PRO/M68/CompM2 Compatible (and other 30mm tube red dots)
2.26" Height for a modern, heads-up optic position
Integrated Battery Storage keeps a spare on-gun for zero-down time
Self-Centering Caps with no torque required—even clamp, simple setup
True 1913 Spec mount interface for solid lock-up on standard rails
6061-T6 aluminum body with 304 stainless fasteners optimized to trim excess weight while reinforcing stress points

Specifications:

Material: 6061-T6 Aluminum
Finish: Anodized
Scope Ring Size: 30mm
Weight: 5.3 oz.
Height: 2.26"
Width: 2.1"
Length: 2.4"

Compatibility:

Mounts on all Mil-Spec Picatinny rail systems
Aimpoint PRO/M68/CompM2 and other 30mm tube red dots

Includes:

1x Fortis AP 1 Mount PRO for 30mm Red Dot
1x Battery Storage Cap
1x Torx Wrench

Details:

Running an Aimpoint PRO or M68 and want a mount that disappears into the rifle? The Fortis AP 1 Mount – PRO is a straightforward, duty-ready 2.26" optic mount that keeps your dot exactly where you expect it—high enough for a modern heads-up posture, sturdy enough for hard use, and light enough that it won’t drag down your setup.

Aimpoint-Class 30mm Compatibility

Drop in and clamp up with the Aimpoint PRO, CompM2, M68, or any comparable 30mm red dot. Self-centering caps square the optic as you torque, so you’re not fighting tube cant or chasing a wandering zero. The base is cut to true 1913 Picatinny spec for a solid rail interface and reliable return-to-zero when the optic comes off and goes back on with consistent torque.

Clamp, Set, and Forget

Fortis machines the body from U.S.-sourced 6061-T6 aluminum, leaving material only where it matters for stiffness under recoil without unnecessary weight. Hardware is 304 stainless with a black nitride finish, and the single Torx fastener makes on-gun setup quick and repeatable. No over-torque drama—just a clean clamp that holds.

Height and Handling That Make Sense

A 2.26" optical centerline plays well with modern, heads-up shooting, gas masks, and ear-pro, while still presenting naturally from awkward positions like barricade or prone. At roughly 5.3 oz, the mount balances well on carbines and helps keep weight where it belongs—at the muzzle and in the barrel, not in the mount.

Details That Pay Off at the Range

Integrated battery storage keeps a spare on the rifle instead of buried in a pack, and the self-centering cap design helps preserve zero through knocks and daily handling. Pair it with quality rails and consistent torque and you get repeatable alignment you can trust through training cycles, travel, and maintenance.

Built for Real Use

From the precise 1913 interface to corrosion-resistant hardware and efficient machining, the AP 1 – PRO is engineered to be the quiet part of your system—simple, rigid, and dependable through recoil, weather, and routine remove-and-reinstall cycles. Mount it once, verify zero, and get back to work.

Fortis AP 1 Mount PRO for 30mm Red Dot