MPN: LA00223


  • Forward Porting, enlarged vents
  • Heat Treated, Hard Turned, and Chrome Lined
  • MPI Carpenter 158 Bolt, Shot Peened, Hard Turned / Ground
  • CP-R360 Domed Cam Pin
  • Mil-Spec Staked Gas Key
  • Grade 8 Hardened Fasteners
  • All Hard Chrome surfaces are to MIL-STD-171
  • Shot Peening is conducted with S110 shot, Established by Almen Gage A-2 strip .006 -.008
  • Lifetime Warranty from LANTAC


  • Caliber: 5.56 NATO / .223 Rem. / 300BLK
  • Weight: 11.7 oz.
  • Finish: Nickel Boron
  • Material: 8620 Steel
  • Profile: M16

**A full-auto (A.K.A. M16) bolt carrier installed in a standard semi-auto AR-15 will not make the gun fire full-auto.


  • AR-15


  • 1x Nickel Boron Bolt
  • 1x Nickel Boron Carrier
  • 1x Nickel Boron Extractor
  • 1x LANTAC Domed Cam Pin
  • 1x Carrier Gas Key
  • 1x Firing Pin




Your AR-15 rifle represents a tremendous investment and says a lot about you as a person. To maintain your prized possession, you will need to replace worn or damaged parts at times. One of these replacements may be your bolt carrier group. When it is time to replace your bolt carrier group, you should take a look at this LANTAC Enhanced BCG.

Bolt carrier groups (BCG), play a large part in managing the gas system of a semi- or full-auto weapon. Because of the extreme part they play in the operation of a firearm, it’s important to choose a replacement carefully. The M16 style BCG can increase lock time, and enhance the reliability of your rifle. An improperly staked gas key is the worst enemy of the competitive shooter or the law enforcement officer. If your rifle should start short-stroking in the middle of a competition or a shootout, you risk the loss of points or your life. The gas key for the LANTAC BCG is properly staked at four points with grade eight fasteners.

What is So Special About This LANTAC BCG?

The nickel boron coating of this LANTAC bolt carrier assembly is applied with the advanced UCT EXO process for superior lubricity and a Rockwell hardness of 82-85. The re-designed forward facing gas ports enables it to operate more efficiently and to better tolerate a suppressed barrel. All the critical components of this product have been hard turned/ground to ensure durability.

The LANTAC E-BCG's forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors. However, it should be noted that the E-BCG is not a complete solution for this issue and all rifles are different. 'Over Gassed' guns will suffer to a larger extent from this problem.

Have a question?

Ask an Expert

Reviews (4)

  • Not worth it

    Posted by Unknown on 11th Feb 2017

    After just under 2k rounds the finish is wearing and discoloring. Not uncommon but its not uniform in normal wear areas its sparatic across the carrier. The cam pin has wear grooves in it. The bolt itself looks like bolts that have significantly higher round counts. Maybe its just the one i got but that isnt very reassuring either when im spending this much i expect a product with significant qa/qc screening. Ill be contacting lantac as well.

  • Third time buyer...I guess I like it

    Posted by Gary B on 31st Dec 2016

    I have not unlimbered my new Lantac Enhanced Bolt Carrier Group as it is for a future build. I do have two in service one with only 2000 rounds fired and the other barely a hundred + rounds. Not a lot by most standards, but enough for me to realize it works very well. I do not know if it would work well in a full automatic, as I don't have a full auto, but I think it would work fine.

  • love it

    Posted by stephen on 20th Oct 2016

    Good product n excellent place to order from

Customers Also Viewed