• Provides forward directional muzzle blast control desired on rifles with shorter 9mm barrels
  • Can be installed using a standard armorers wrench
  • No crush washer required
  • Super lightweight - made from Grade 5 Titanium


  • Caliber: 9MM
  • Material: Grade 5 Titanium
  • Finish:
    • BlackDiamond (Gloss Black): High Performance DLC
    • UnicornTears (Gloss Chameleon): PVD
    • C4V (Gloss Gold): PVD TiN
    • Raw Titanium (Gloss Silver): Bead Bleasted
  • Weight: 2.82 oz.
  • Length: 2.25"
  • Outer Diameter:
    • Muzzle End: 0.78"
    • Body: 1.15"
  • Bore Diameter: 0.44"
  • Thread: 1/2"-28 TPI


  • 9mm barrel with 1/2"-28 thread pitch


  • 1x Iron City Rifle Works Wraith 9mm Titanium Linear Compensator


Linear compensators produce the most benefit on firearms with shorter barrels, where concussive blowback on the shooter is more prevalent than on guns with longer barrels. The City Rifle Works Wraith 9mm titanium linear compensator is designed to effectively direct gas forward, away from you and bystanders.

Enhanced Performance

The City Rifle Works Wraith 9mm Titanium linear comp is designed to effectively redirect the concussive force of the report forward from the barrel, making the report less noticeable. The City Works linear compensator does not reduce the actual noise per se but directs it forward from the barrel, away from the shooter, so it is less noticeable. Because it directs the blast forward, the linear compensator helps to protect full-length rails from damage by directing corrosive gases away from the end of the rail.

Quality Construction

The City Rifle Works Wraith 9mm Titanium linear comp is constructed from super lightweight raw grade 5 titanium and weighs in at just 2.82 ounces, so you won't notice much, if any, additional weight and has a 1/2"-28 thread pitch. The compensator is available in bead-blasted raw titanium silver, gloss BlackDiamond, Chameleon, and gloss gold high-performance anodized finishes.

Easy Installation

The City Rifle Works Wraith 9mm Titanium linear comp is easily installed using a standard armorers wrench on 9mm barrels with a 1/2"-28 thread pitch. Installation does not require a crush washer.

Have a question?

Ask an Expert

Reviews (0)

There are currently no reviews for this product. Pease write a review by clicking the button below.

Customers Also Viewed