MPN: 91401


  • Keep your hammer and trigger pins from coming out - improved reliability of trigger assembly
  • No sharp protrusions to interfere with hand or glove
  • Compatible with AR-15 and AR-10 lowers
  • Made in the U.S.A.


  • Material: Steel
  • Weight: 0.14 oz.
  • Finish: Black
  • Pin Diameter: 0.154"


  • AR-15 and AR-10


  • 2x CMC Trigger Pins
  • 4x Screws
  • 2x Torx Wrenches


You spend a lot of time and money getting everything ready for a day at the range. Then at the worst time comes the dreaded misfire, all because of a little trigger pin that wouldn’t stay put. You will put an end to that concern with a set of CMC Anti Walk Pins, they stay put.

CMC Anti-Walk Pins: The Little Pin That Could

Mil-Spec trigger pins may work fine, for a while. When you squeeze off enough rounds they won’t. They’re a lot of companies making lower receivers and just a difference of a thousandth of an inch makes a lot of difference. A set of anti-walk AR trigger pins will make a lot of difference too. That difference could just be a day at the range, or it could mean your life. CMC gives you a low-cost insurance policy in a set of anti-walk AR trigger pins.

Bullets Come Out, Not Trigger Pins

Bullets, flash, and sound are all that’s supposed to come out of your AR. CMC Anti-Walk Pins are precision machined and held in place with retaining screws so you never have to worry about them coming out of place. CMC gives the same attention to detail to a seemingly insignificant part as a set of anti-walk AR trigger pins as any other part they manufacture. You need that kind of care when deciding on such a critical part to pair with your weapon.

Have a question?

Ask an Expert