• Single Point Cut with “SPT” Single Process Technology to maximize precision and minimize deviation in the rifling grooves
  • The bore, chamber and rifling are cut in one high precision machine w/o human interference
  • Enhanced slide fit & lock up for improved accuracy
  • 11-degree target crown and high quality finishes for greater accuracy
  • Flute pattern reduce drag and clear debris
  • "Button" and "Single Point Cut" technology produce tighter tolerances and true alignments on the bore and chamber
  • Available in 1/2-28 RH thread for muzzle device/suppressor attachment
  • Threaded versions come with a thread protector

*Pistols with threaded barrels are NOT legal in all Areas / States. Please check your local and state laws BEFORE ordering this product.


  • Caliber: 9mm Luger
  • Length:
    • Non-Threaded: 4.035"
    • Threaded: 5.862"
  • Material: 416R Stainless Steel
  • Barrel Diameter: 0.593"
  • Muzzle Thread Pattern: 1/2"-28
  • Finish:
    • MDC (Grey)
    • Titanium Nitride TiN (Gold)
    • Black DLC
  • Weight:
    • Non-Threaded: 3.6 oz
    • Threaded: 3.9 oz.
  • Length:
    • Non-Threaded: 4.04"
    • Threaded: 4.633"
  • Twist Rate: 1:10


  • CZ P10C


  • 1x Killer Innovations Velocity CZ P10C Barrel
  • 1x Thread Protector (Threaded models only)
  • 1x High-Temp Rubber O-Ring (Threaded models only)


Killer Innovations uses superior high-grade materials and Single Process Technology to give you some of the most reliable and accurate velocity CZ P10C barrels on the market today. Manufactured in both threaded and non-threaded options Killer Innovations delivers unparalleled quality for your next CZ P10C upgrade.

The Single Process and Single Point Technology Difference

Killer Innovations Velocity CZ P10C barrels are cut with Single Process Technology which maximizes precision. The Single Process Technology was developed by Killer Innovations and is the most accurate pistol bore process ever created. The bore, the rifling, and the chamber are all cut using a single-precision machine without any human interference. The CZ P10C threaded barrels are manufactured using Single Point Technology. This is a painstaking process that makes rifling using a single cutter that creates 120 identical and individual grooves with less than .0001” deviation from each other. These cutting-edge technological advances allow Killer Innovations to deliver some of the best pistol barrels on the market.

Killer Innovations CZ P10C Barrels Will Improve Your Performance

Killer Innovations barrels exceed regular market standards because button and standard cut barrels can not achieve the consistent accuracy of Single Process and Single Point Technology. The CZ P10C barrels and CZ P10C threaded barrels are coated with the high-quality finish options of DLC black, MDC (grey), or TiN (gold). These finishes give a unique and interesting look to your firearm and offer superior protection to wear and tear. All these innovations combine to give you tighter tolerances, better alignment, more reliability, and superior accuracy when sending rounds downrange.

*Please note that the darkness of the coating is different from batch to batch, and might not look the same as pictures shown.

Have a question?

Ask an Expert