• Reduces felt recoil and muzzle rise
  • Works on Glock Gen 3 to Gen 5 without permanent modifications
  • Secure design without the need of set screws
  • Functions with most grain ammo
  • Fits most G34 holsters when installed on a Glock 19
  • Special bullnose fitment for Gen 5 Glocks
  • Comes with installation tools


  • Caliber: 9mm
  • Material: 7075 Aluminum
  • Finish:
    • Body: Bead Blasted and Type III Hardcoat Anodized
    • Stem: Electroless Nickel, Anodized Gold, or Anodized Black
  • Weight: 1.48 oz.
  • Length: 1.56"
  • Width: 0.96"
  • Height: 1.4"
  • Thread: 1/2"-28


  • Gen 3-5 Glock with 1/2"-28 TPI (G17, 17L, 19, 19X, 26, 34)

*Due to the added weight to the barrel and recoil reduction, it might require using a lighter (than factory) spring rate recoil spring on some semi-auto pistols to ensure proper function.


  • 1x Tyrant CNC Glock T-Comp Body
  • 1x T-Comp Stem
  • 1x 16mm Installation Wrench
  • 4x Rubber O-Rings for T-Comp Stem
  • 4x Thicker Rubber O-Rings for Barrel


If you’re serious about your shooting, you probably want the same kind of control over your Glock as you do your long guns. The problem is that most handgun compensators just don’t do the work like you need them to. Enter Tyrant CNC T-Comp. This is the Glock compensator you’ve been waiting for. Your rifle is going to be jealous of this one.

A Complete Package for Easy Installation

When you unbox the Tyrant CNC T-Comp, you’ll find everything you need for installation to your Gen3, 4, or 5 Glock ½-28 threaded barrel. In the box, you’ll find the Tyrant Glock T-Comp main body, the T-Comp nut, two sets of o-rings and a wrench to ensure a smooth installation.

Simply apply one of the thicker o-rings to the threaded end of your barrel, making sure to snug it up against the rear shelf of the threaded space, and a thinner o-ring on the back side of the Glock T-comp nut. Then place the T-Comp body over the end of your barrel with the notched end toward the rear of your Glock. Finally install the T-Comp nut, tightening with the supplied wrench. There’s no need to time the nut, its 360-degree design is ready to go at any phase of rotation.

The Tyrant CNC T-Comp is a Reliable Way to Enhance Your Shot

Installation with the included o-rings ensures a solid fit that won’t come loose on firing or when you holster and unholster your firearm. That means you can count on it to assist you with every shot whether you’re a weekend range warrior or a serious competitive shooter.

Whatever makes your world spin, the T-Comp will give you an edge. By directing expelled gasses, the T-Comp helps the shooter maintain better control of every shot by mitigating muzzle rise and perceived recoil. Control enhances every individual shot as well as allowing faster recovery and acquisition of follow-up targets.

Wing Tactical and Tyrant CNC Better Together

When great companies work together things only get better for the consumer. Shooters who want great quality accessories for their Glocks don’t need to look any further than Wing Tactical to find the Tyrant Glock parts and accessories they need to be better shooters. Wing Tactical and Tyrant CNC, count on them and Give yourself an edge.



This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Wing Tactical, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit

Have a question?

Ask an Expert