Aero Precision Mil-Spec AR-15 Upper Receiver

Aero Precision Mil-Spec AR-15 Upper Receiver

Product Code:
AP-APAR501603
Shipping:
Calculated at Checkout
$63.99 - $79.99
*

MPN: APAR501603AC / APAR501603C / APAR501606AC / APAR501606C / APAR501642AC

Features:

  • M4 style feed ramps
  • 0.250 takedown pin holes
  • Laser engrave T-marks
  • Mil-Spec
  • Compatible with all Mil-Spec AR-15 components

*Stripped Models don't not come with forward assist and dust cover.

*Assembled Models come with forward assist and dust cover pre-installed.

*Might not compatible with handguard that has built-in anti-rotation tabs.

Specifications:

  • Material: 7075-T6 Aluminum
  • Finish: Mil-Spec Type III Class 2 Hardcoat Anodized
  • Weight: 6.9 oz.

Compatibility:

  • AR-15

Details:

When you need a quality AR15 upper receiver built to M16/M4 specifications that features M4 feed ramps you don’t want sloppily made junk. You need an upper that marries flawlessly with the best lowers out there that will provide a good long service life. When you choose an Aero Precision AR-15 Stripped Upper Receiver you can be assured you’re getting just what you need and not a lot of extra fluff you don’t want.

Why Aero Precision Upper?

The Aero Precision Upper is manufactured from the best quality American 7075-T6 aluminum available. This is a quality forged piece that is precision machined under the watchful eye of American craftsmen to Mil-Spec standards. When it’s complete it gets a finish of super tough type III hard anodized coating that will stand up to whatever you dish out at the range or in the field. It’ll even survive the occasional slip of a tool at the bench so you can rest assured it’ll keep looking good even after you’re done assembling the rifle of your dreams. The Aero Precision upper receiver features a Picatinny rail so it’s ready to accept your optics mount or sights as soon as your build is complete. If you want a clean, upper receiver to marry to your favorite lower you won’t run into fit issues with an Aero upper.

This Aero precision upper receiver delivers quality without compromise and a fit that’s precise, but not so finicky that you’re restricted to using Aero’s lower alone. This is Mil-Spec manufacturing at its best.

Choose an Aero Upper Receiver and Choose Quality

From the selection of quality 7075 T6 Aluminum though the final coating and engraving processes, your Aero Precision stripped upper is a component designed and manufactured for reliability and quality performance you can count on.

Aero Strength

Forged uppers are stronger than their machined counterparts. The force of forging an Aero stripped upper creates a discernable grain in the aluminum structure. The grain in Aero Precision stripped uppers can withstand more punishment, more pressure and stress than billet uppers. That’s real strength under fire.

Aero Upper Receivers are Reliable

Each Aero stripped upper features M4 feed ramps for reliable feeds every time operation. Laser engraved T-marks remain easy to distinguish over a long service life. That makes changing and replacing accessories a breeze.

Wing Tactical is Proud to Bring You Aero Precision

When you need quality components for your next AR-15 build, look no further than Wing Tactical. We pride ourselves on bringing our consumers products made by the best manufacturers in the business. When you choose an Aero upper receiver from Wing Tactical, you can be sure you’re going to give yourself an edge with a quality component made right here in the United States.

Wing Tactical is Here for You

When you drop us an email or contact us through our website directly, you can be sure that the team at Wing Tactical is here ready to answer your questions and address any concerns you might have. It’s all part of bringing you the best products and service at the best value.

Write a Review

15 Reviews

  • It's an assembled upper
    4

    Posted by Joshua on 2nd May 2019

    It's a "mil-spec" upper if that matters to you.
    I did notice though I had a peculiar issue with my Ballistic Advantage Hanson Profile barrel. I had to use a rubber mallet to get it to go into the upper and then use a barrel nut to get it to seat all the way. It's beyond snug. But if I use any other barrel I have they slide right in no problems. The BA barrel slides right into all my other uppers no problems, many of which are Aero Precision uppers. I think I just happened to get a barrel with an extension that was riding the line on the outside of the tolerances and an upper riding the line on the inside of the tolerances. Either way it's no biggie, it's in there and it definitely won't be coming out on it's own for any reason.

  • Aero Upper
    4

    Posted by Rob M on 28th Apr 2019

    Very nice upper, for a basic upper. Haven't had any issues with any other part fitment or operation.

  • Aero Upper
    4

    Posted by Rob on 6th Mar 2019

    Seems to be a nice upper with a nice even finish and no forge/tooling marks. Barrel and the Atlas S handguard mated right up and looks great. Wing Tactical always delivers quickly and provides updates on shipping. Haven't had any issues which required customer service.

  • AERO PRECISION MIL-SPEC AR-15 UPPER RECEIVER
    5

    Posted by Josh T. on 29th Dec 2018

    Purchased on sale, best bang for your buck. Great quality, fast shipping!

  • Aero Precision Upper Receiver
    5

    Posted by Roy on 16th Dec 2018

    Quality part at a bargain price. No fitment or function issues. Wing Tactical has a great selection which makes shopping a breeze.

  • Great product
    5

    Posted by Mike on 13th Nov 2017

    I ordered this upper receiver to complete a 223 build and I was very satisfied with this upper. I didn't have any issues with the fit of the finish and I will get another when I do my 300 build.

  • ar 15 stripped upper
    5

    Posted by Unknown on 11th Nov 2017

    Have not done anything with it yet

  • Great solid stripped Upper
    5

    Posted by Unknown on 19th Oct 2017

    If you aren't looking for weird or fancy Uppers, these are the way to go! the anodizing is great and the CNC cuts are Mil-spec! the awesome low price has no relation to the quality of these uppers!

  • Great Purchase
    5

    Posted by Doc on 18th Oct 2017

    Could not pass up these quality uppers, bought 2 complete.Super fast shipping !


[ ]