Primary Weapons Systems 5/8x24 Muzzle Device Alignment Shim Kit

Primary Weapons Systems 5/8x24 Muzzle Device Alignment Shim Kit

Product Code:
PWS-5MDAS301
Shipping:
Calculated at Checkout
$4.95 $4.21

MPN: 5MDAS301

Features:

  • Different Shim sizes for perfect timing

Specifications:

  • Material: Steel
  • Finish: Raw Steel
  • Outer Diameter: 0.85"
  • Inner Diameter: 0.635"

Includes:

  • 1x Large Shim (180 degrees rotation)
  • 8x Medium Shims (45 degrees rotation)
  • 1x Small Shim (even finer adjustment)

Note: This set is designed only to use on 5/8"x24 threaded barrels.

Details:

Every gun guy has wished that there was a better way to do one thing or another when he was in the middle of a build. One of the most frequent complaints out there has got to be the hassle of mounting muzzle devices. Crush and peel washers are an irritation at best, and a complete nightmare at their worst. So what’s a guy supposed to do? Primary Weapons Systems has a simple answer to that question. The PWS 5/8x24 Muzzle Device Alignment Shim Kit takes all of the blood sweat and tears out of the process of muzzle device installation.

The Primary Weapons Systems Shim Kit is a Muzzle Device Alignment Set that allows the armorer to easily time and apply the muzzle device of your choosing without the hassle of peel washers. Forget the anxiety you have about mounting muzzle devices. When you use PWS’s muzzle brake shims installing your muzzle device is very straight forward.

The PWS Shim Kit is a set of quality muzzle brake shims that comes in a variety of specially calculated thicknesses that are designed to help you to time your muzzle device correctly without a lot of preamble. If you need a half turn of adjustment, simply add a large shim. If you need a spacer for a build that doesn’t have a relief cut before the threads, a large shim is exactly what you need there too. The second size of shim will back your device off 45 degrees. If you need to adjust things in smaller increments, the number 3 shim will be your best friend. In every Primary Weapons System Alignment kit you’ll receive 8 size-2 shims as well as one size-1 and one size-3 muzzle break shim. Simply choose the combination of shims that will align your muzzle device where you want it. You’ll want to remember that the difference between hand and wrench tight is about thirty degrees and take that into account when you make your selections.

Whether you’re mounting a muzzle break, compensator or one of PWS’ compensating flash hiders, you’ll find the Primary Weapons Systems Muzzle Device Alignment Set is an evolutionary step beyond crush washers and prayer. Strength Through Evolution, it’s the Primary Weapons System way. Because It’s Time.

Write a Review

5 Reviews

  • Perfect fit
    5

    Posted by Dave on 16th Mar 2020

    Absolutely the perfect fit for my muzzle brake. Had to try three different combinations, but IT WORKED!

  • It worked.
    4

    Posted by Silent Wolf Ballistics on 21st Nov 2019

    The medium size shims weren’t exactly all the same exact size, so it was tough to gauge which ones I needed. The small one was the size it was supposed to be. And as far as the large one, I’m honestly not sure why anyone would need it. Also I felt they were all a touch too wide with a little too much wiggle room. But, my complaints out of the way, they served my purpose quite well.

  • PRIMARY WEAPONS SYSTEMS 5/8X24 MUZZLE DEVICE ALIGNMENT SHIM KIT
    5

    Posted by michael finn on 16th Oct 2019

    great product. Shims worked exactly as expected

  • PRIMARY WEAPONS SYSTEMS 5/8X24 MUZZLE DEVICE ALIGNMENT SHIM KIT
    3

    Posted by Alan on 16th Apr 2019

    Ok but the O.D. needs to be smaller..O.D> bigger than the Barrel O.D. and the Muzzle break it self.

  • A simple and easy way to time a muzzle device. No need for crush washers!
    5

    Posted by Kevin Moore on 13th Jul 2018

    During my build, I was attempting to time my muzzle device and went to the usual crush washer. That failed and was really frustrating as it looked like I was going to need a second crush washer to get it timed. As it is said, “Insanity is doing the same thing over and over and expecting a different outcome.” I stopped what I was doing, got a glass of tea and was browsing the Wing site. (You folks are great by the way) and I saw the shim kit. Ordered it and it turned out to be exactly what I needed. Two shims of different sizes fixed my build. One thing though, the shims circumference didn’t match the barrel/muzzle intersect, so I marked the shims with a dry erase marker and judiciously trimmed them to size with a pair of scissors.
    I really appreciated the way the shims were packaged and the only “gripe” about the packaging is the card which has the sizes on it is used to seal the bag. I understand it is a cost saving measure, but whatever you do, don’t lose that card! I resealed the bag and used a permanent marker to write the sizes on the bag itself and taped the size card to the package.
    Bottom line, no hyperbole, this shim kit can easily be used alone or in conjunction with a crush washer to quickly time a muzzle device. My next build, I’ll use these shims and forget about the crush washers. Inexpensive, easy to use, you can’t go wrong.


[ ]