MPN: SW0400 / SW0410


  • Efficient clamp design guarantees precise operation and unprecedented rigidity
  • CNC milled from 7075-T6 for ultimate strength and durability
  • No levers, bolts or knobs, preventing it from getting caught on gear and surroundings
  • Patented ClickDrive QD mechanism is completely recoil proof
  • A low profile thumbwheel allows user to take the mount off in under 3 seconds
  • Mounts to 1913 Picatinny rails
  • Available in Absolute Co-Witness Height and Lower 1/3 Height
  • Made in the U.S.A.


  • Material: 7075-T6 Aluminum and 4140H Steel
  • Finish: Type III hardcoat anodized and Black Oxide
  • Weight:
    • Absolute Co-Witness: 1.51 oz.
    • Lower 1/3: 1.59 oz.
  • Length:
    • Absolute Co-Witness: 2.08"
    • Lower 1/3: 2.127"
  • Width: 1.34"
  • Center Height Over Rail:
    • Absolute Co-Witness: 1.42" (36mm)
    • Lower 1/3: 1.57" (40mm)


  • Trijicon RM01, RM02, RM03, RM04, RM05, RM06, RM07, RM08, RM09


  • 1x Scalarworks LEAP Trijicon RMR Mount
  • 2x Nylok Treated Mounting Screws
  • 1x T10 Torx Driver Bit

Scalarworks LEAP Trijicon RMR Mount


Just about any optics mount could be called quick detach. That's usually not a problem. One hard bump, enough heavy recoil, and a lot of mounts are going to detach, only not on purpose. Then they don't want to reattach because they're in pieces. If you want an RMR mount that quickly detaches when you want. In addition to easily reattaching and keeping it's zero. Then it's Scalarworks LEAP Trijicon RMR Mount all the way.

Ultimate Strength And Durability

How many optics mounts have you went through over the years? Honestly, how many are taking up space in your junk box? I know, I have a few that have been collecting dust for a while. Especially when it comes to the Quick Detach class, they seldom turn out to be what you thought. That is until you turn to the Scalarworks LEAP Trijicon RMR Mount. This bad boy works as advertised.

Light Made Right

Are you going for an ultra-light, lightning-fast build? Well, guess how much weight you can shave off by staying away from those blocky, inexpensive mounts? If you want a sleek, sexy profile for your weapon of choice, you have to steer clear of the Aimpoint world. A rectangular sight picture on top of a Scalarworks LEAP Trijicon RMR Mount is striking. On the other hand, if you have a 12 gauge for your PDW, you must consider recoil as your top threat. Sure, a 5.56 has a little bump when you touch off a round. However, it's nothing like a 12 gauge loaded with buckshot. If you want to run Trijicon RMR optics on your weapon, do it right with Scalarworks LEAP.

Scalarworks LEAP Trijicon RMR Mount 2

Have a question?

Ask an Expert