Description
MPN: SI-ROM
Features:
- Up to 120° Rotational Adjustment: Fully adjustable offset mount allows precise optic positioning with up to 120° of rotation
- Wide Optic Compatibility: Designed to fit 30+ popular red dot optics, giving you flexibility across different setups
- Fast Transition Capability: Enables quick switching between your primary optic and offset red dot for close-range engagements
- Ambidextrous Configuration: Can be set up for left- or right-side mounting to match shooter preference
- Low-Profile Design: Keeps your rifle streamlined while maintaining easy access to your secondary optic
- Secure Picatinny Mounting: Attaches firmly to standard 1913 Picatinny rails for reliable retention
- Durable Construction: Built to withstand recoil and hard use in demanding conditions
Specifications:
- Material:
- Multi-Angled Optic Mount: SUS630 Hardened Stainless Steel
- Double-Sided Optic Plate: 6061-T6 Aluminum
- Finish:
- Multi-Angled Optic Mount: QPQ
- Double-Sided Optic Plate: Hard Anodized
- Weight: 3.22 oz.
- Length: 2.39"
- Width: 2.05"
- Height: 1.1"
Compatibility:
- Mount Compatibility:
- 1913 Picatinny
- Red Dot Compatibility:
- AIMPOINT: MICRO T-1/T-2/H-1/H-2
- SIOPTO: SCOUTER
- C-MORE SYSTEMS: STS (V1)
- SIG SAUER: ROMEO3MAX/3XL
- VORTEX OPTICS: RAZOR RED DOT
- EOTECH: EFLX MINI REFLEX SIGHT (MRS)
- LEUPOLD: DELTAPOINT PRO
- SIG SAUER: ROMEO1
- SIG SAUER: ROMEO1PRO
- SIG SAUER: ROMEO2
- ATIBAL OPTICS: MRD V2
- BURRIS OPTICS: FASTFIRE™ 2
- CRIMSON TRACE: CT RAD™ PRO
- VORTEX OPTICS: VIPER RED DOT
- VORTEX OPTICS: VENOM RED DOT
- HOLOSUN: 407C/507C/508T
- HOLOSUN: 509T
- SWAMPFOX OPTICS: JUSTICE/LIBERTY KINGSLAYER
- TRIJICON: RMR/SRO
- SHIELD SIGHTS: AMS/RMS/RMS2/RMSC/RMSX/SIS/SMS/SMS2/SMSC
- SIG SAUER: ROMEOZERO
- HOLOSUN: 407K/507K
NOTE: This optic mount is compatible with optics that use the Aimpoint Micro, C-More, DeltaPoint Pro, Docter/Noblex, RMR, or Shield footprints, as well as other optics that share these same footprint patterns but aren’t listed above.
Includes:
- 1x Strike Multi-Angled Optic Mount (fully assembled)
- 1x Strike Double-Sided Optic Plate (New MOP)
- 4x Screw [M3x7mm T10 Rounded]
- 3x Screw [M3x10mm T10 Rounded]
- 3x Screw [M3x8mm T10 Flat]
- 3x Screw [M3x14mm T10 Flat]
- 3x Screw [M3x8mm T10 Rounded]
- 3x Screw [M3x11mm T10 Rounded]
- 3x Screw [M3x9mm T10 Flat]
- 3x Screw [M3x15mm T10 Flat]
- 2x Screw for optic plate to mount [M3x10mm T10 Flat]
- 2x Screw [M3x10mm T10 Flat]
- 1x Torx Tool [T25]
- 1x Torx Tool [T10]
- 5x Large Mounting Post
- 3x Tall Mounting Post
- 5x Shallow Mounting Post
- 5x Small Mounting Post
- 1x Loctite® Threadlocker Blue 243®
Details:
Most offset mounts lock you into one angle. The Strike Industries Rotatable Offset Optic Mount (ROM) doesn’t. You can rotate the mount to match how you actually shoot—whether you roll the rifle slightly or run it more upright.
That adjustment makes a bigger difference than it sounds. Instead of adapting your head position to the mount, you set the mount to your natural movement.
Fine-Tune Your Transition Setup
This is built for shooters running a primary optic with a secondary offset—usually a red dot paired with an LPVO or magnified scope. The ROM lets you dial in the angle, so transitions feel smooth rather than forced.
Once it’s set, the dot lines up naturally when you cant the rifle. No hunting for the reticle, no awkward wrist angle.
Low Profile, Doesn’t Get In The Way
The mount keeps things tight to the rifle. It doesn’t stick out more than it needs to, which helps avoid snagging gear or getting bumped during movement.
It’s there when you need it, and out of the way when you don’t.
Solid Mounting, Repeatable Position
Once you lock in your preferred angle, it stays put. The mounting system is designed to hold zero and maintain position through regular use.
It attaches to standard Picatinny rails, so it integrates easily into most AR setups.
A Small Adjustment That Changes How The Rifle Feels
Offset optics are all about speed. If the angle isn’t right, everything feels off. When it is right, transitions become automatic.
The Strike Industries ROM gives you that control. Instead of working around a fixed design, you set it up exactly how you want—and the rifle responds the way it should.
