Description
MPN: MIM-DR
Features:
- 3.0 lb Performance-Tuned Pull: Features a 3.0 lb single-stage pull designed to balance speed, control, and a predictable trigger feel
- Crisp, Zero-Creep Break: Delivers a clean, competition-grade break with zero creep for a consistent trigger press
- Ultra-Short, Tactile Reset: Refined reset geometry provides fast, positive feedback, supporting quick follow-up shots and consistent trigger control
- Significant Hammer Force: Upgraded geometry and spring configurations produce a hard-hitting hammer strike, designed for dependable primer ignition, including harder primers and steel-case ammunition
- Under-Housing Spring System: Precision-positioned springs beneath the cassette help maintain proper alignment, reduce internal movement, and stabilize the trigger unit
- Built for High-Round-Count Consistency: The stabilized internal mechanism is designed for long-term durability and repeatable performance through extended use
- Purpose-Built Trigger Blade: Unique blade geometry helps locate and maintain consistent finger placement, promoting a repeatable pull from shot to shot
- Competition-Focused Performance: The combination of a 3.0 lb pull, crisp break, and exceptionally short reset creates a responsive trigger system for competition and performance-focused builds
Specifications:
- Material: Heat-treated steel components with 7075 aluminum housing
- Finish: Black
- Type: Single Stage
- Pull Weight: 3 lb
- Trigger Style: Flat
- Pin Size: Small Pin (.154)
Compatibility:
- AR-15 / AR-10 platforms
*Will not work on AR-15 that have pins .168-.174" in diameter.
Includes:
- 1x MIMTAC Valkyrie AR Performance Trigger
- 1x Anti-Rotation Pin Kit
Details:
The MIMTAC Valkyrie AR Performance Trigger has a factory-set 3.0 lb pull, no creep, and a clean single-stage break. There isn't much movement to work through. Apply pressure, hit the break, and the trigger moves into a very short reset.
It's a noticeable change from the longer, heavier pull of a standard Mil-Spec trigger and is aimed squarely at performance and competition-oriented AR builds.
Short Reset with Positive Feedback
The MIMTAC Valkyrie trigger's reset is exceptionally short, but MIMTAC didn't remove the tactile feedback in the process. There's a distinct reset point, so you can feel when the trigger is ready again without letting it travel unnecessarily far forward.
That combination of a 3 lb break and short reset is a big part of the Valkyrie's character.
Light Pull, Strong Hammer Strike
The light trigger pull doesn't mean MIMTAC went light on hammer force. The Valkyrie drop-in trigger uses an upgraded hammer and spring configuration designed to deliver a substantial primer strike.
MIMTAC specifically designed the system with harder primers and steel-case ammunition in mind, where weak hammer strikes can become an issue.
Under-Housing Springs Keep the Housing Seated
Springs positioned underneath the trigger housing maintain tension against the housing once it's installed. They help keep the unit seated and aligned in the lower rather than allowing unnecessary movement between the housing and receiver.
It's a simple addition with a practical purpose: keep the trigger unit stable.
The Trigger Blade Has a Purpose
The Valkyrie's unusual trigger blade isn't shaped that way just for appearance. Its profile gives the finger a defined contact area, helping you settle into the same position on the trigger from one pull to the next.
It certainly gives the Valkyrie its own look, but the geometry is functional first.
For shooters looking beyond a basic AR trigger, the Valkyrie brings together a light 3 lb pull, strong hammer strike, very short tactile reset, and a stabilized housing design in one performance-focused trigger.
