• Drop-in installation - No stoning or fitting is required
  • Precision EDM cut target hammer
  • Reduces trigger pull down to approximately 2.5 - 2.75 lbs
  • Hardened to a RC 58–60 to prevent any excessive wear and deformation


  • Material: Stainless Steel
  • Finish: Silver
  • Weight: 0.6 oz.


  • Ruger 10/22 and 10/22 Magnum


  • 1x Volquartsen Target Hammer
  • 1x Hammer Spring
  • 2x Hammer Shims
  • 1x Hammer Bushing
  • 1x Trigger Return Spring
  • 1x Pin


Have you ever wondered about how it would up your game at the range if you could just get a real Ruger 10/22 trigger job done? I know, trips to the gunsmith are time-consuming and costly. However, if you could do a 10/22 hammer replacement at your kitchen table, what then? Well, for less than it costs for a tank of gas you can. All you need is a Volquartsen target hammer with bushings for Ruger 10/22, and you will get to enjoy a whole new shooting experience.

Upgrade Your 10/22 With the Volquartsen 10/22 Hammer

This Ruger 10/22 Volquartsen hammer is precision EDM wire cut for match-grade performance. You wouldn't want to do a 10/22 hammer replacement with anything less. Standard factory parts are okay for playing around. However, when you're ready to take your shooting game to the next level you need quality, like a Volquartsen 10/22 hammer driving home your shots.

You Can Do Custom Ruger 10/22 Trigger Job at Home

The Ruger 10/22 Volquartsen hammer is made out of tough, hardened stainless steel. Therefore, you can be sure it's going to be hammering away for a lifetime of fun. Of course, the best part of doing a Ruger 10/22 trigger job is getting a lighter, cleaner trigger out of the deal. That's why you don't stop with just a Volquartsen 10/22 hammer. You want to end up with a trigger that breaks between 2.5 and 2.75 lbs so you can tear up anything from that empty can to the upcoming steel challenge. That's why you want the entire kit. The Volquartsen target hammer with bushings for Ruger 10/22, springs and all. Hey, a custom Ruger 10/22 trigger job on your kitchen table, you got this.

Have a question?

Ask an Expert