MPN: AR15-UP-160 / AR15-UP-360 / AR15-UP-169


  • Directs muzzle gases and muzzle flash forward (Not designed to reduce recoil, muzzle rise, or flash signature)
  • Enhance weapon appearance
  • No porting at the bottom to reduce dust signature when firing from the prone position
  • No poring at the top to reduce flash sight obstruction through optics or sights
  • Common 3/4 wrench flats for easy installation


  • Caliber: .223 Rem. / 5.56 NATO / .22LR / 9mm / .308 Win / 7.62 NATO / 300BLK
  • Material: 6061 Aluminum
  • Finish: Hardcoat Anodized
  • Weight: 4.13 oz.
  • Length: 3.25"
  • Outer Diameter:
    • Body: 1.37"
    • Barrel Muzzle End: 0.9"
  • Bore Diameter:
    • 1/2"-28 and 1/2"-36: 0.46"
    • 5/8"-24: 0.58"
  • Thread: 1/2"-28, 1/2"-36, or 5/8"-24 TPI


  • Any .223 Rem, 5.56 NATO, .22LR, or 9mm rifle/carbine barrel with 1/2"-28 or 1/2"-36 thread pitch
  • Any .308 Win, 7.62 NATO, or 300BLK rifle/carbine barrel with 5/8"-24 thread pitch


  • 1x KAK Industry Flash Can


In most short-barreled rifles, the excessive muzzle flash can be a problem. It can cause a lot of noise and even obstruct your sight. Moreover, the heat from the flash can damage your rifle or any accessories that are mounted close to the muzzle.

Designed for SBR

If you are using a short-barreled rifle, a flash can is an excellent muzzle device for you. Flash cans are designed to direct the hot expanding gash, muzzle flash, and noise of the rifle downrange and away from you. So, if you are looking for a flash can to put on your rifle, check out the KAK Industry Flash Can.

Practical Design

It is made from 6061 aluminum and has a hardcoat anodized finish for reliability. It does not feature any ports on the top or the bottom, which prevents the muzzle flash from obstructing your sights, and makes the rifle easier to shoot in the prone position by decreasing its dust signature.

The KAK Industry Flash Can is available in three different thread pitches and can work with any rifle or carbine chambered in .223 Rem, 5.56 NATO, .22LR, or 9mm with 1/2"-28 or 1/2"-36 thread pitch or any.308 Win, 7.62 NATO, or 300 BLK rifle with 5/8"-24 thread pitch

Have a question?

Ask an Expert