• 30% stronger and harder than 7075-T6
  • Dimple tip design for pushing pin during disassembly
  • Ultra-lightweight
  • Made in the U.S.A.


  • Material: Super Aluminum Alloy
  • Finish: Type III Hardcoat Anodized
  • Pin Size: 0.278"
  • Weight:
    • Takedown Pin: 0.11 oz.
    • Pivot Pin: 0.14 oz.


  • SR-25/DPMS LR-308

*Will not work with Armalite AR-10


  • x1 V Seven Super Aluminum .308 Pivot Pin
  • x1 V Seven Super Aluminum .308 Takedown Pin


So, you decided to go for that DPMS style .308 build and you’re chugging right along until it’s time to put it all together, what about the pins? They have to be the right ones for that large platform build, right? Well, the right ones to reach for are the lightweight .308 takedown pins made by V Seven Weapon Systems.

Light on The Scales and The Wallet

The good folks at V Seven have designed an extremely durable answer to your dilemma. By choosing an aluminum alloy that is super-hard, yet still machines well they can turn out a quality product while keeping costs to a minimum. When you install a set of lightweight .308 takedown pins by V Seven you will save weight on your build, money in your bank account and gain the confidence in knowing you have the best. Your new takedown and pivot pins are designed to last a lifetime, you can hardly beat that at any price.

It Does Matter

So many people think about the myriad of flashy parts involved in a complete build, yet when it comes to the takedown and pivot pins they blow right by how important these pins are. Think of pulling your high-dollar bass boat with a low-end ball hitch from a discount store, kind of makes you cringe huh. Getting a quality set of V Seven Lightweight .308 takedown pins is like buying a top-quality class-3 hitch to pull your boat. You do it because you want to get there with everything just the way it was when you started out. Order your V Seven Weapon Systems Ultra-Light Takedown Pins today and keep your LR-308/SR25 together.

Have a question?

Ask an Expert

Reviews (2)

  • Top Notch Takedown Pins

    Posted by ig@hardmacksmith on 2nd Sep 2021

    Been using V7WS stuff for awhile, I like these pins are as light as you can get, the coating is consistent and just the right "matte" and they have divots in each side to help guide your punch against a stiff take down detent.

  • Smith and Wesson M&P10 DO NOT fit

    Posted by Joe C on 22nd Apr 2020

    lightweight but they do not push all the way into a Smith and Wesson M&P10. if your looking at the upper receiver from above with the buffer tube towards you, the pins do not sit flush on the right side of the receiver. they are about 1/8" to long. they sit flush and actually engage the detent on the left side of the yea they do function properly, but if perfection is what you are looking for and you own a M&P10 I do not recommend these

Customers Also Viewed