• Lightweight Grade 5 Titanium
  • Drop-in installation
  • Advance coating provides excellent wear resistance, high lubricity, and ease of cleaning
  • About half of the weight of standard steel firing pin
  • Made in the U.S.A.


  • Material: Grade 5 Titanium
  • Weight: 0.21 oz.
  • Finish: Black Ionbond (DLC)


  • DPMS Gen I pattern LR308 rifles

*Not compatible with high-pressure bolt


Have you ever had a shooting range visit that changed everything? I did, last year my AR-10 misfired, which does happen, but rarely with mine. After going through all the normal checks I noticed the rounds’ primer wasn’t dented, my firing pin had broken. All that driving, hotels, and a weekend shot, now I was a spectator because there wasn’t a spare to be found. I want to spare you my fate, what I did was to install a new 308 titanium firing pin made by V Seven. I have never had to live that weekend over again.

V Seven 308 Titanium Firing Pin Can Take It

Titanium has a much higher tensile strength than the standard steel firing pin that comes stock. A .308 packs quite a punch, not only down range but on all the internal parts of your weapon. Sooner or later a plain old steel firing pin will fail, consequently, V Seven chose this ultimate metal to use in your new 308 titanium firing pin.

Clean and Simple

Your new V Seven 308 titanium firing pin is an exact drop-in upgrade for the steel firing pin you are stuck with now. It is custom computer machined to microscopic tolerances, everyone ships out as a perfect piece of deadly art. V Seven uses a special coating which serves as a dry lubricant so you know your new titanium firing pin is made to last. The people at V Seven guarantees it will do just that for a lifetime. When you take your 308 apart to clean it, you’ll find that the Black Ionbond finish is especially resistant to contaminants, therefore, you save time scrubbing.

Have a question?

Ask an Expert