- 3 - 3.5 lbs. trigger pull with JP Enterprises trigger parts
- 4 - 4.5 lbs. trigger pull with most Mil-Spec AR-15 trigger parts
- Smooth and lighter trigger pull
- 1x Yellow JP Trigger Spring
- 1x Yellow JP Hammer Spring
- 1x JP Disconnector Spring
If you're looking for a high-quality trigger spring kit, the JP Enterprises AR-15 trigger spring kit is the perfect purchase. This kit will give a standard AR-15 a 4- to 4.5-pound trigger pull. If you are using JP Enterprises parts, these springs will give you a 3- to 3.5-pound trigger pull. If you want to improve the quality of your trigger function but don’t have the resources to replace the entire fire control group, this trigger spring kit is an ideal option.
JP Trigger Spring: A $10 Trigger Upgrade That You Will Not Regret
The JP Reduced Power Spring Kit includes instructions for easy installation. The instructions also contain information on engagement surface polishing, a procedure that will give your trigger a smoother, more even pull. The JP Enterprises Reduced Power Spring Kit are compatible with standard lower receiver assemblies and aftermarket triggers designed for the AR-15 platform.
To achieve the best results with the JP Enterprises AR-15 Trigger Spring Kit, be sure to use USA-manufactured ammunition. Ammo made in another country may contain harder primers, leading to poor ignition with this particular product. These springs are designed for recreational firearms only and should not be installed in a duty weapon or a home defense firearm.
About JP Enterprises:
JP Enterprises is proud to provide customers with products that can effectively meet their needs while out in the field. The current president of JP Enterprises travels nationwide each year, testing JP products at various competitions. As a result, all the parts and accessories produced by this company are designed to fill the needs of both professional and recreational shooters.
Posted by Unknown on 1st Dec 2017
Was too lite and would not even discharge a single round. The rounds would be dimpled, but we’re not struck hard enough to fire
Cheapest way to get a 3.5lb to 4.0lb trigger
Posted by Bill on 30th May 2017
I use these springs in ll my AR's. I can buy a complete lower, stick these springs in and have a VERY nice trigger. Why pay 100's of dollars for the same feel.
Exactly as described
Posted by trigger happy on 25th Mar 2017
This spring kit combined with an ALG ACT will give you consistent 3.5lb pulls. I have only shot 270 rounds with this combination, but have had only one failure using PMC brass. From the appearance of the round it looked more like a bad primer than a light strike.
The best upgrade for your money!
Posted by Cliffspot on 26th Jan 2017
Tired of that sucky mil spec trigger? Get the JP Spring kit and improve your shooting! One of the first and best upgrades to your weapon is a trigger job. This drop in kit will bring a vast improvement to your stock setup. It even has polishing instructions to take that gritty feeling out! Before you sink a couple hundred dollars into an aftermarket trigger, try this and use the money you saved for ammo and more range time!
Best $10 you can spend on an AR
Posted by Unknown on 6th Nov 2016
I have used these springs on a few builds; MILSPEC, polished and nickel plated. Each install yielded a lighter, smoother pull. It'll take a 6.5 lb MILSPEC trigger down to about 4.5 lb. Start with the nickel plate, polished trigger, you'd think you spent a fortune.
Words of warning, should not be used for real defense or duty rifles-- you may experience light strikes and failures to fire on harder primer ammo. Also on rimfire rifles this is not the best set up, you should opt for the enhanced reliability springs, or keep the MILSPEC hammer spring.
Reduces trigger pull
Posted by Bob Hall on 18th Mar 2016
I put this reduced spring in my Sig M400, as the stock trigger spring seemed a little stiff. The JP Enterprises Reduced Power Spring set really reduced the trigger pull and makes it easier to stay on target.
Reduces Trigger Pull as Stated
Posted by Unknown on 21st Feb 2016
I installed these springs, polished the trigger, and sear surfaces very carefully with jeweler's rouge on a dremel. These surfaces were extremely shiny after just a minute of polishing. Upon installation, I coated the surfaces with the Rydol grease mentioned in the instructions. The trigger pull was greatly reduced and the DPMS Oracle still functions as before. Very satisfied with this product. Wing Tactical was great with shipping costs and delivery.
Cant beat the turn time and no crazy shipping fees!!
Posted by Brad on 24th Dec 2015
Ordered the reduced trigger springs here based on the recommendation of a friend over using Brownells where I had been ordering these. My gripe with Brownells is they had been killing me with their exorbitant shipping cost and 2-3 week turn times. Glad I found Wing Tactical. They got it to me in a couple days and the shipping price was extremely minimal (as it should be for something that literally weighs the amount of a couple paper clips). I will definitely be using these guys again as well as recommending them to others.
The best $10 you can spend on your AR
Posted by m on 19th Dec 2015
I prefer my PSA mil spec trigger (polished my sear surfaces) with JP springs to my RRA match 2 stage that was 10x the cost. The $10 are more than worth it.