JP Enterprises Original Trigger Kit

JP Enterprises Original Trigger Kit

Product Code:
Calculated at Checkout
$119.95 $109.95



  • Comes with two different pull-weight hammer springs
  • Adjustable pull travel and reset travel
  • M4 style curved trigger


  • Material: Tool Steel
  • Finish: Black
  • Type: Single Stage
  • Pull Weight: Between 3 lbs. - 4 lbs.
  • Trigger Style: Curved
  • Pin Size: Small Pin (.154)


  • AR-15 / AR-10 platforms


  • 1x JP trigger
  • 1x Disconnector
  • 1x Disconnector spring
  • 2x 1/2" engagement set screws (one of them is spare)
  • 2x 3/8" overtravel set screws (one of them is spare)
  • 1x Reduced power trigger return spring
  • 1x Tactical reduced power hammer spring (red)
  • 1x Competition reduced power hammer spring (yellow)
  • 1x 0.050 hex key
  • 1x DVD instructional video
  • 1x Instruction manual

**This kit does not come with a hammer.


The JP Enterprises Original Trigger Kit is a kit for small pin AR receivers that includes a JP Trigger, hammer and trigger springs, engagement and overtravel screws and a disconnector spring. The kit also includes an instructional video to help you correctly assemble the kit for your application as well as a standard selection of springs which includes a yellow reduced power trigger spring as well as yellow and red reduced power hammer springs. Depending on your desired trigger setup, you will use different springs to complete the assembly of your JP Enterprises Trigger assembly. Some of these springs must be purchased separately from the JP Trigger Kit.

Users who desire a recreational or competition type setup that results in a trigger pull of the 3 to 3.5-pound pull weight range will assemble the JP Trigger with a yellow trigger spring and a yellow hammer spring combination that works well with most hand loads and non-military ordinance.

If you want extra ignition reliability a red hammer spring and yellow trigger spring combination gives you a release weight of 3.5 to 4.0 pounds and creates more reliable ignition conditions for low–sensitivity primers that may be encountered in foreign manufactured ammunition. The Red/Yellow spring combination is necessary for any large framed AR application, in order to deliver ignition reliability at a 100% rate. This weight rating is also considered the minimum rating for any tactical duty application. It must be noted, that this set up is only acceptable for tactical duty with US domestic manufactured ammunition.

If you want to use the JP Enterprises Trigger for a Duty or Defense type build you will need to assemble it with a full power hammer spring which is color coded gray. This spring is only available as a stand-alone purchase. Complete assembly for many agencies requires a release weight in excess of 4.0 pounds. For AR-15 and AR-10 platforms this version of the JP Trigger assembly offers 100% ignition reliability.

If you choose to set up to meet the NRA Service Rifle guidelines for competition you will have to acquire the CMP spring set which includes a full power hammer spring and a trigger return spring that allows for trigger adjustment to an excess of 4.5 pounds so that you may qualify at minimum NRA release weight.

Whatever your application, simply choose the correct spring combination and the JP Enterprises Trigger will give you a quality shooting experience with reliability and flexibility that competitors don't easily match.

Write a Review

1 Review

  • Fully Adj. Short Reset Trigger Perfection

    Posted by Dave on 2nd Jan 2020

    This is my 2nd JP trigger. The fist was the "System" which included the hammer and al. I was so impressed by the 1st one that I thought I'd try just the trigger for correcting a rifle that had a truly horrible trigger (Anderson's). JP's trigger only produced the same great result. Fully pre and post travel adjustable that gave me a ~3.5lb pull with a roughly 1/8" reset travel. You can use red loctite to set it permanently. TIP: if you used a permanent thread-locker and need to readjust, just touch the set screw with a hot soldering iron tip about 20 sec and the loctite will loosen up and allow further tweeking.

[ ]