- Spring-loaded, internal detent rod for easy installation and take-down.
- Constructed with light-weight durable polymer material weighing in at only 0.3 oz.!
- Cut-out window for easy disassembly on any AR-15 receiver!
- Will never corrode rust or fade
- Will never deform or get bent out of shape
- Comes in a variety of designs
- "True Seal" internal lip that seals the port tighter than traditional dust cover designs.
- Built-in adjustable detent set screw to compensate for wear on receiver.
- Available in multiple designs to customized your AR!
- Material: Polymer
- Weight: 0.3 oz.
- Length: 3.46"
If you’d like to replace the dust cover on your AR-15 or install a new one for the first time, Strike Industries has produced the dust cover of your dreams. With a spring-loaded internal detent rod, the enhanced version of the Ultimate Dust Cover by Strike is a breeze to install and remove.
The Strike Industries Enhanced Ultimate Dust Cover includes a cut-out window to facilitate disassembly. The slimmer design of the enhanced version enables it to be compatible with all AR-15 receivers on the market today. Best of all, this dust cover is extremely light and weighs a mere 0.3 ounces.
The “True Seal” lip of the enhanced dust cover has been modified to offer a better seal and helps to keep all that unwanted grit and grime from entering your receiver while you’re in the field. The design of this dust cover enables users to remove and replace the cover in five to 10 seconds. Made from high-density polymer material, this enhanced dust cover will last you and your AR-15 for many hours of shooting pleasure. This dust cover is available in various design options for a customized look. Order yours today and experience the quality of Strike Industries!
Wing Tactical Offers the Best Parts and Accessories
The Strike Industries Enhanced Ultimate Dust Cover is a high-quality innovative polymer AR-15 dust cover. Choose the design that fits your build and personality the best in black or FDE to match your equipment. Rest assured the cover is not susceptible to corrosion, and won’t warp or bend out of shape. That means the “True Seal” internal lip will stay true round after round, even under the heat of rapid fire.
Strike Industries Innovation in Every Part
Strike Industries Enhanced Ultimate Dust Cover features a fully integrated design. There are no small parts to lose. An internal detent rod keeps the cover in place without the use of separate clips. If you need to make an adjustment, it’s a simple matter of turning the set screw on the detent assembly to create the desired tension. It’s designed to be installed and removed in a matter of seconds, even in the field. Access to the detent screw is easily afforded by a cut-out window. This allows the Strike Industries AR-15 Dust Cover to work on virtually any Mil-Spec AR-15 receiver you would like to add it to without a hassle.
Wing Tactical Customer Service for Gun People by Gun People
At Wing Tactical, we’re shooters and armorers ourselves, so we know what works. When it comes to choosing an AR-15 Dust Cover, we’ve seen the competition, and we know the Strike industries Enhanced Ultimate Dust Cover offers quality and durability that you can count on. If you have a question about this part or any other item we stock, just contact us and we’ll get you the answers you need.
Strike Industr...Head over to our website for more information about our UDC! ...
Showing reviews 1-25 of 69 | Next
Posted by Unknown on 29th Mar 2018
Best dust cover
Posted by Brockelsby on 6th Mar 2018
I will never buy a different dust cover easy install light weight no bs just a good product
Strike Industries AR-15 Enhanced Ultimate Dust Cover
Posted by justin on 16th Feb 2018
fit is perfect on my rifle also worked great right out of the box i didnt need to adjust tension, one side note if your removing your old dust cover like me i was able to just remove my 2pc handguard and slide the pin out threw the barrel nut holes for gas tube insted of scratching my rifle up by removing it from the rear which it would of , now this was in my case and prob wont work for all but just figured id add that in to save another from an unwanted scratch and only takes a sec to check
would buy right away if i got another rifle :)
Incredible fit, easy installation.
Posted by Justin M on 13th Feb 2018
I was initially hesitant to purchase due to it being polymer instead of aluminum/metal, but when you actually think about what this part does, the polymer works great. The installation was done in seconds, and the fit was impressive. It is the closest sealing dust cover I've found. Looks amazing, lightweight, and durable so far. Definitely recommended. Price is pretty awesome too!
One of the best AR Add-ons out there
Posted by Daren Dowsett on 17th Jan 2018
I have bought a couple of these for different guns and replaced all of them on all of my AR's
These are great, thumbs up!!!!!
Posted by Unknown on 7th Dec 2017
Works great very easy to install.
great dust cover
Posted by Unknown on 23rd Oct 2017
This dust cover is super easy to install and works great!
Posted by Unknown on 25th Sep 2017
quick and easy to install even when removing old dust cover.
Don't leave your upper without it!
Posted by gutthans on 29th Jul 2017
I own 8 of these now, since getting the first one. A few notes: Installation is stupidly fast as is removal, but pay attention to the crooked spring leg... improper orientation will allow the door to flop and bounce once opened due to insufficient pressure. You must pull it around about 90 - 120 degrees rotation so that it rests against the receiver under tension as you install (a 'hooked' tool is useful). Insert the leading pivot pin, depress and hold the plunger pin, grab/wind the spring crook, pop the trailing plunger in. Fit has been flawless, but sometimes working the door open/closed helps 'seat' the part. IF the door pops open, OR is difficult to close, you must turn the set screw to adjust the height of the ball. Clockwise to raise; counter to lower.
Posted by Jonathan on 25th Jul 2017
I was a little skeptical of a plastic port door. I've always used metal. Was throwing together an ultra light build and decided to give this a run. I have to say it's really nice. The poly mold is top notch. No cheap looks or rough edges. And the quick attach system makes installation a breeze. I would buy it again for sure.
Love these things
Posted by Ed H. on 19th Jul 2017
9 AR's in every caliber, and all have been switched over to these dust covers. Really love these little additions to the weapon. Easy to install and basically bullet proof.
Best dust cover out there.
Posted by Freddy G on 25th Jun 2017
Excellent dust cover, looks great, installs easily, Good price.
looks good and simple install
Posted by Unknown on 22nd Jun 2017
this install makes so much more sense than traditional EJP Covers.... hopefully it will be solid in the field.
Great dust cover and easy to install
Posted by Mpoakes on 15th Jun 2017
Installed this new dust cover in literally seconds! Great look, feel and texture. Appears to be great quality and will be ordering more for my other AR's.
Ultimate dust cover
Posted by Bob Mullenaux on 10th Jun 2017
One of the easiest, nicest, most enhancing dust cover I have ever used. No more disassembly of the fore arm, chance of scratching the upper are virtually eliminated. Highly recommend.
Great Dust Cover
Posted by Chuck on 12th May 2017
First) Easy to install.
Second) Quiet Operation (yes, that can be a big deal sometimes)
Third) Does not leave mark/remove coating from upper
I'll never use a regular dust cover again.
Nice dust cover, super easy install
Posted by alex on 21st Apr 2017
Chose this for my 9mm build. I've never installed one of the conventional dust covers with an E clip but it looks like a little bit of a pain. This one, however, took less than 5 seconds to install. It really doesn't get any easier.
Posted by DAK on 13th Apr 2017
Got these yesterday, had them installed on two uppers in less than 30 ticks. Very easy install and functions perfectly. They look better than the standard cover too.
Works so far and looks better than a standard cover
Posted by Jake on 12th Mar 2017
Bought to replace the stock cover that came on my upper because the finish was pretty bad. The strike industries was simple to install it was harder to get the stock one off then to install this one. Looks good as well. Can't speak on durability only time will tell.
Posted by Michael on 12th Mar 2017
A great addition for a lightweight build. Easy to install. I will certainly be buying more.
Best dust cover ever !
Posted by Donald Smith on 2nd Mar 2017
This is the only dust cover I will ever use for my AR builds. I love the ability to install or remove it without having to remove the barrel assembly. Great Customer Service and fast shipping from a Great Company to deal with. Thanks Wing Tactical.
Simple and perfect
Posted by Jonny on 26th Feb 2017
Got this for my Aero Precision M4E1 Enhanced Upper. Literally took me around 10 seconds to install, and looked amazing when it was on. Love it, would never replace it (unless it broke).
Black Capsule EUD
Posted by wolf_pack1998 on 24th Feb 2017
I like these Port Dust Covers! They are very easy to install and remove. These covers are a very touch and durable polymer. Thumbs up for functionality and 2 thumbs up for aesthetics. The black 'capsule' design looks great with my current build. The black absolutely matches my Anderson Upper/Lower. Also very easy to adjust the height of the closure device that keeps the cover closed. This is the 2nd Strike Industries Port Cover I've bought. The first one I tried was the FDE cover with the US Flag on it. Been using it for about 6 months now and have not had any issues with it. However, be aware that SI FDE is a little different than Magpul FDE...so they won't exactly match. Comes close though. Overall, other than words and phrases etched on the standard mil-spec cover, there aren't that many alternatives to the AR platform. SI has managed to change that with these Port Covers. Wanting to customize your AR? Buy one of these.
Posted by -Edgar on 17th Feb 2017
I recently bought this for my Colt LE6920 and it fit nice and flush with the Colt lower.
Very easy to install and looks good. I recommend taking your time when removing the
metal bar from the old dust cover. I use electrical tape in both side to not scratch my lower, tight fit but it will come out.
Posted by Kalani on 10th Feb 2017
These are my favorite dust covers by far. So easy to install and remove. Have one on all of my AR's.
Showing reviews 1-25 of 69 | Next